Belt Auction

Can't get a replacement serpentine belt on a 4 cylinder 99 Wrangler.?

This is definitely the proper belt and is routed correctly. I'm using a Dayco belt (910K6, 6PK2310), and the factory diagram. My Jeep has power steering and AC. The replacement belt seems to be just to small to get on the pulleys, and I even dropped the manual tensioner all the way down. Two grown men could not get this belt on. I think it might be due to the weather since it has been between 30-35 degrees F in Ohio. Any support for this idea or alternate theories? The stamp on the belt matches the packaging, and that belt is correct according to dayco's website. As for a different brand are there any brands that are known to fit slightly looser?

Public Comments

1. If everything is as you say it is then you have the wrong belt. Look close, things can be in the wrong package. Does the part number on the belt match the info on the belt package?
2. do the alternator last and if you are not in the grove on any of the pulleys the belt will not go on that belt is 2310 mm long
3. You have the wrong belt.
4. I dont think cold weather would cause the belt to shrink that much. I'd go out and get a different belt from a different store-if it fits take the other one back and tell them it didnt work.